Car keys · Mississauga
Ignition Lock Repair
The key turned the engine off in the driveway and now refuses to come back out.
In plain words
Whether the key won't insert, won't turn, turns without engaging anything, or is stuck and refuses to come back out, each version of the symptom points toward a different part of the mechanism. A key that spins loosely usually means something has disconnected inside; a key that won't insert usually means the barrel or the key itself is the obstacle. Naming the exact behaviour on the phone lets the locksmith bring the right tools before ever touching the vehicle.
How the visit goesThe car arrived with one worn-looking key and a story about a lost spare. It turns the ignition, eventually, after some patience and a particular angle nobody in the household can quite describe or repeat on the first try.
Ignition Lock Repair
How the visit goes
What the vehicle's build decides about access
Every vehicle's ignition assembly is put together a little differently: many use a steering-column cylinder in a simple housing or one locked down with shear bolts, while others mount the keyed switch in the instrument panel behind its own trim that has to come off cleanly to avoid marking the dash. The locksmith identifies which arrangement is in front of them before starting, since that decides which tools come out of the case and how the surrounding trim gets handled once the cylinder itself is reached.
Testing every position before calling it finished
A repaired or replaced cylinder is cycled through every stop, off, accessory, on and start, with the key the owner will actually use afterward. The steering lock is engaged and released several times, the dash is watched for the expected response at each position, and the engine is started and shut off to confirm the whole sequence holds up in practice rather than just on the workbench.
A little care that keeps the barrel turning smoothly
A cylinder that has just been serviced benefits from the same light touch that kept it healthy in the first place: whatever lubricant the vehicle's own service information calls for worked into the keyway every so often, since some ignitions specify grease rather than a dry product. Wipe debris off the key itself before each use, and retire a key that has started to look rounded or thin, well before it becomes the reason for another visit.
Ignition Lock Repair
In the van
Cylinder decoder
Dry graphite or PTFE lubricant
Plug follower
Key code reader
Pick and tension tools
Ignition Lock Repair
What affects the quote
Access through the steering column
Reaching some ignition cylinders means removing trim, shrouding or fasteners around the column first, and putting all of it back cleanly afterward. A column that is straightforward to open takes less time than one that is not.
Distance to where the vehicle is
Travel is part of every visit, and a vehicle parked across town takes a different amount of driving time to reach than one nearby, which factors into how the visit gets arranged.
Availability of the replacement part
A common cylinder for a widely driven vehicle is usually straightforward to source, while an older or less common vehicle may need a part ordered in before the repair can be finished properly.
What to have ready
- Has anyone already tried to force the lock?
- Do you have the vehicle permit or proof of ownership handy?
- Has this ignition been serviced or replaced before?
Ignition Lock Repair: questions
QuestionsMy key is stuck in the ignition and won't come out. Is that a problem?
It is mostly inconvenient rather than urgent, though it is worth having looked at soon since a stuck key often means a wafer or the steering-lock mechanism is not releasing the way it should. Forcing it risks snapping the key or damaging the barrel further, so the safer route is to leave it be and have the mechanism assessed and freed properly.
How many keys will I leave with?
That depends on what you ask for and what the vehicle already has. A single working key is enough to drive away, but most people ask for at least one spare cut and tested at the same time, especially if the visit started because the only working key had worn down badly or snapped off inside the ignition altogether.
How do I keep my ignition and keys in good shape going forward?
A little attention goes a long way: whatever lubricant the vehicle's own service information calls for worked into the keyway, keys wiped free of grit before use, and a worn or bent key retired in favour of a fresh cut from a crisp original. Catching a barrel that has started needing a wiggle early keeps it an easy fix rather than a stuck ignition later on.
Related services
- Car Key ReplacementThe engine cranks, catches for a second and dies, and a small key-shaped light keeps blinking on the dash.
- Spare Car Key DuplicationThe blade on the everyday key has gone shiny and thin along one edge, and lately it needs a wiggle before the ignition catches.
- Key Fob ProgrammingEvery fob for the car disappeared at once inside a bag that was never recovered, and the vehicle now sits in the driveway with no way in and no way to start it.